CVS--Concurrent Versions System v1.12.12.1: The Repository

Buy CVS & Subversion Stuff!

A first-time reader does not want to dig into the gory guts of any software. Suggestion for documentation structure:

1. What is CVS? Do I need it?
2. Setting up CVS
3. Using CVS
4. How does CVS work? ( For humans )
5. How does CVS work? ( For Übergeeks )

Right now you learn how stuff is stored before you know how to, or even can, use it. In the suggested order, if you can't get through a section, you won't ever need to read the next section.

The Repository

The

CVS repository stores a complete copy of all the files and directories which are under version control.

Normally, you never access any of the files in the repository directly. Instead, you use

CVS commands to get your own copy of the files into a working directory and then work on that copy. When you've finished a set of changes, you check (or commit ) them back into the repository. The repository then contains the changes that you have made, as well as recording exactly what you changed, when you changed it, and other such information. Note that the repository is not a subdirectory of the working directory, or vice versa; they should be in separate locations.

CVS

can access a repository by a variety of means. It might be on the local computer, or it might be on a computer across the room or across the world. To distinguish various ways to access a repository, the repository name can start with an access method . For example, the access method ''':local:''' means to access a repository directory, so the repository ''':local:/usr/local/cvsroot''' means that the repository is in '''/usr/local/cvsroot''' on the computer running CVS . For information on other access methods, see [[#SEC26|Remote repositories]].

If the access method is omitted, then if the repository starts with '''/''', then

''':local:''' is assumed. If it does not start with '''/''', then either ''':ext:''' or ''':server:''' is assumed. For example, if you have a local repository in '''/usr/local/cvsroot''' , you can use '''/usr/local/cvsroot''' instead of ''':local:/usr/local/cvsroot''' . But if (under Windows NT, for example) your local repository is '''c:\src\cvsroot''' , then you must specify the access method, as in ''':local:c:/src/cvsroot''' .

The repository is split in two parts.

'''$CVSROOT/CVSROOT''' contains administrative files for CVS . The other directories contain the actual user-defined modules.

Telling CVS where your repository is

There are several ways to tell

CVS where to find the repository. You can name the repository on the command line explicitly, with the '''-d''' (for "directory") option:

cvs -d /usr/local/cvsroot checkout yoyodyne/tc

Or you can set the

'''$CVSROOT''' environment variable to an absolute path to the root of the repository, '''/usr/local/cvsroot''' in this example. To set '''$CVSROOT''' , '''csh''' and '''tcsh''' , users should have this line in their '''.cshrc''' or '''.tcshrc''' files:

setenv CVSROOT /usr/local/cvsroot

'''sh'''

and '''bash''' users should instead have these lines in their '''.profile''' or '''.bashrc''' :

CVSROOT=/usr/local/cvsroot
export CVSROOT

A repository specified with

'''-d''' will override the '''$CVSROOT''' environment variable. Once you've checked a working copy out from the repository, it will remember where its repository is (the information is recorded in the '''CVS/Root''' file in the working copy).

The

'''-d''' option and the '''CVS/Root''' file both override the '''$CVSROOT''' environment variable. If -d option differs from '''CVS/Root''' , the former is used. Of course, for proper operation they should be two ways of referring to the same repository.

How data is stored in the repository

For most purposes it isn't important

how CVS stores information in the repository. In fact, the format has changed in the past and is likely to change in the future. Because in almost all cases one accesses the repository via CVS commands, such changes need not be disruptive.

However, in some cases it may be necessary to understand how

CVS stores data in the repository. For example, you might need to track down CVS locks (see section [[CVS--Concurrent Versions System v1.12.12.1: Multiple developers#SEC89|Several developers simultaneously attempting to run CVS]]) or you might need to deal with the file permissions appropriate for the repository.

Where files are stored within the repository

The overall structure of the repository is a directory tree corresponding to the directories in the working directory. For example, supposing the repository is in

/usr/local/cvsroot

here is a possible directory tree (showing only the directories):

<tt>/usr</tt>
 |
 +--<tt>local</tt>
 |   |
 |   +--<tt>cvsroot</tt>
 |   |    |
 |   |    +--<tt>CVSROOT</tt>
          |      (administrative files)
          |
          +--<tt>gnu</tt>
          |   |
          |   +--<tt>diff</tt>
          |   |   (source code to GNU diff)
          |   |
          |   +--<tt>rcs</tt>
          |   |   (source code to RCS)
          |   |
          |   +--<tt>cvs</tt>
          |       (source code to CVS)
          |
          +--<tt>yoyodyne</tt>
              |
              +--<tt>tc</tt>
              |    |
              |    +--<tt>man</tt>
              |    |
              |    +--<tt>testing</tt>
              |
              +--(other Yoyodyne software)

With the directories are

history files for each file under version control. The name of the history file is the name of the corresponding file with ''',v''' appended to the end. Here is what the repository for the '''yoyodyne/tc''' directory might look like:

  <code>'''$CVSROOT'''</code>
    |
    +--<tt>yoyodyne</tt>
    |   |
    |   +--<tt>tc</tt>
    |   |   |
            +--<tt>Makefile,v</tt>
            +--<tt>backend.c,v</tt>
            +--<tt>driver.c,v</tt>
            +--<tt>frontend.c,v</tt>
            +--<tt>parser.c,v</tt>
            +--<tt>man</tt>
            |    |
            |    +--<tt>tc.1,v</tt>
            |
            +--<tt>testing</tt>
                 |
                 +--<tt>testpgm.t,v</tt>
                 +--<tt>test2.t,v</tt>

The history files contain, among other things, enough information to recreate any revision of the file, a log of all commit messages, and the user-name of the person who committed the revision. The history files are known as

RCS files , because the first program to store files in that format was a version control system known as RCS . For a full description of the file format, see the '''man''' page rcsfile(5) , distributed with RCS , or the file '''doc/RCSFILES''' in the CVS source distribution. This file format has become very common--many systems other than CVS or RCS can at least import history files in this format.

The

RCS files used in CVS differ in a few ways from the standard format. The biggest difference is magic branches; for more information, see [[CVS--Concurrent Versions System v1.12.12.1: Branching and merging#SEC61|Magic branch numbers]]. Also in CVS the valid tag names are a subset of what RCS accepts; for CVS 's rules, see [[CVS--Concurrent Versions System v1.12.12.1: Revisions#SEC50|Tags-Symbolic revisions]].

File permissions

All ''',v''' files are created read-only, and you should not change the permissions of those files. The directories inside the repository should be writable by the persons that have permission to modify the files in each directory. This normally means that you must create a UNIX group (see group(5)) consisting of the persons that are to edit the files in a project and set up the repository so that it is that group that owns the directory. (On some systems, you also need to set the set-group-ID-on-execution bit on the repository directories (see chmod(1)) so that newly created files and directories get the group-ID of the parent directory rather than that of the current process. For example,

chmod g+s .)

This means that you can only control access to files on a per-directory basis.

Note that users must also have write access to check out files because

CVS needs to create lock files (see section [[CVS--Concurrent Versions System v1.12.12.1: Multiple developers#SEC89|Several developers simultaneously attempting to run CVS]]). You can use LockDir in CVSROOT/config to put the lock files somewhere other than in the repository if you want to allow read-only access to some directories (see section [[CVS--Concurrent Versions System v1.12.12.1: Reference manual for Administrative files#SEC206|The CVSROOT/config configuration file]]).

Also note that users must have write access to the

'''CVSROOT/val-tags''' file. CVS uses it to keep track of what tags are valid tag names (it is sometimes updated when tags are used, as well as when they are created).

Each

RCS file will be owned by the user who last checked it in. This has little significance; what really matters is who owns the directories.

CVS

tries to set up reasonable file permissions for new directories that are added inside the tree, but you must fix the permissions manually when a new directory should have different permissions than its parent directory. If you set the '''CVSUMASK''' environment variable, that will control the file permissions which CVS uses in creating directories and/or files in the repository. '''CVSUMASK''' does not affect the file permissions in the working directory; such files have the permissions that are typical for newly created files, except that sometimes CVS creates them read-only (see the sections on watches, [[CVS--Concurrent Versions System v1.12.12.1: Multiple developers#SEC91|Telling CVS to watch certain files]]; -r, [[CVS--Concurrent Versions System v1.12.12.1: Guide to CVS commands#SEC119|Global options]]; or '''CVSREAD''' , [[CVS--Concurrent Versions System v1.12.12.1: All environment variables which affect CVS#SEC207|All environment variables which affect CVS]]).

Note that using the client/server

CVS (see section [[#SEC26|Remote repositories]]), there is no good way to set '''CVSUMASK''' ; the setting on the client machine has no effect. If you are connecting with '''rsh''' , you can set '''CVSUMASK''' in '''.bashrc''' or '''.cshrc''' , as described in the documentation for your operating system. This behavior might change in future versions of CVS ; do not rely on the setting of '''CVSUMASK''' on the client having no effect.

Using pserver, you will generally need stricter permissions on the

CVSROOT directory and directories above it in the tree; see [[#SEC33|Security considerations with password authentication]].

Some operating systems have features that allow a particular program to run with the ability to perform operations that the caller of the program could not. For example, the set user ID (setuid) or set group ID (setgid) features of unix or the installed image feature of VMS.

CVS was not written to use such features and, therefore, attempting to install CVS in this fashion will provide protection against only accidental lapses; anyone who is trying to circumvent the measure will be able to do so and, depending on how you have set it up, may gain access to more than just CVS . You may wish to instead consider pserver. It shares some of the same attributes, in terms of possibly providing a false sense of security or opening security holes wider than the ones you are trying to fix, so read the documentation on pserver security carefully if you are considering this option ([[#SEC33|Security considerations with password authentication]]).

File permission issues specific to Windows

Some file permission issues are specific to Windows operating systems (Windows 95, Windows NT, and presumably future operating systems in this family. Some of the following might apply to OS/2, but I'm not sure).

If you are using local

CVS and the repository is on a networked file system which is served by the Samba SMB server, some people have reported problems with permissions. Enabling WRITE=YES in the samba configuration is said to fix/workaround it. Disclaimer: I haven't investigated enough to know the implications of enabling that option, nor do I know whether there is something which CVS could be doing differently in order to avoid the problem. If you find something out, please let us know as described in [[CVS--Concurrent Versions System v1.12.12.1: Dealing with bugs in CVS or this manual#SEC214|Dealing with bugs in CVS or this manual]].

The attic

You will notice that sometimes

CVS stores an RCS file in the '''Attic''' . For example, if the CVSROOT is '''/usr/local/cvsroot''' and we are talking about the file '''backend.c''' in the directory '''yoyodyne/tc''' , then the file normally would be in

/usr/local/cvsroot/yoyodyne/tc/backend.c,v

but if it goes in the attic, it would be in

/usr/local/cvsroot/yoyodyne/tc/Attic/backend.c,v

instead. It should not matter from a user's point of view whether a file is in the attic;

CVS keeps track of this and looks in the attic when it needs to. But in case you want to know, the rule is that the RCS file is stored in the attic if and only if the head revision on the trunk has state '''dead''' . A '''dead''' state means that file has been removed, or never added, for that revision. For example, if you add a file on a branch, it will have a trunk revision in '''dead''' state and a branch revision in a non '''dead''' state.

The CVS directory in the repository

The

'''CVS''' directory in each repository directory contains information, such as file attributes (in a file called '''CVS/fileattr''' . In the future additional files may be added to this directory, so implementations should silently ignore additional files.

This behavior is implemented only by

CVS 1.7 and later; for details, see [[CVS--Concurrent Versions System v1.12.12.1: Multiple developers#SEC95|Using watches with old versions of CVS]].

The format of the

'''fileattr''' file is a series of entries of the following form (where '''{' and `}''' means the text between the braces can be repeated zero or more times):

ent-type

filename <tab> attrname = attrval {; attrname = attrval } <linefeed>

ent-type

is '''F''' for a file, in which case the entry specifies the attributes for that file.

ent-type

is '''D''', and filename empty, to specify default attributes to be used for newly added files.

Other

ent-type are reserved for future expansion. CVS 1.9 and older will delete them any time it writes file attributes. CVS 1.10 and later will preserve them.

Note that the order of the lines is not significant; a program writing the fileattr file may rearrange them at its convenience.

There is currently no way of quoting tabs or line feeds in the filename, `=' in

attrname , `;' in attrval , etc. Note: some implementations also don't handle a NUL character in any of the fields, but implementations are encouraged to allow it.

By convention,

attrname starting with `_' is for an attribute given special meaning by CVS ; other attrname s are for user-defined attributes (or will be, once implementations start supporting user-defined attributes).

Built-in attributes:

_watched

Present means the file is watched and should be checked out read-only.

_watchers

Users with watches for this file. Value is

watcher > type { , watcher > type } where watcher is a username and type is zero or more of edit, unedit, commit separated by `+' (that is, nothing if none; there is no "none" or "all" keyword).

_editors

Users editing this file. Value is

editor > val { , editor > val } where editor is a username and val is time + hostname + pathname , where time is when the '''cvs edit''' command (or equivalent) happened, and hostname and pathname are for the working directory.

Example:

Ffile1 _watched=;_watchers=joe>edit,mary>commit
Ffile2 _watched=;_editors=sue>8 Jan 1975+workstn1+/home/sue/cvs
D _watched=

means that the file

'''file1''' should be checked out read-only. Furthermore, joe is watching for edits and mary is watching for commits. The file '''file2''' should be checked out read-only; sue started editing it on 8 Jan 1975 in the directory '''/home/sue/cvs''' on the machine '''workstn1''' . Future files which are added should be checked out read-only. To represent this example here, we have shown a space after '''D''', '''Ffile1''', and '''Ffile2''', but in fact there must be a single tab character there and no spaces.

CVS locks in the repository

For an introduction to

CVS locks focusing on user-visible behavior, see [[CVS--Concurrent Versions System v1.12.12.1: Multiple developers#SEC89|Several developers simultaneously attempting to run CVS]]. The following section is aimed at people who are writing tools which want to access a CVS repository without interfering with other tools accessing the same repository. If you find yourself confused by concepts described here, like read lock , write lock , and deadlock , you might consult the literature on operating systems or databases.

Any file in the repository with a name starting with

'''#cvs.rfl.''' is a read lock. Any file in the repository with a name starting with '''#cvs.pfl''' is a promotable read lock. Any file in the repository with a name starting with '''#cvs.wfl''' is a write lock. Old versions of CVS (before CVS 1.5) also created files with names starting with '''#cvs.tfl''' , but they are not discussed here. The directory '''#cvs.lock''' serves as a master lock. That is, one must obtain this lock first before creating any of the other locks.

To obtain a read lock, first create the

'''#cvs.lock''' directory. This operation must be atomic (which should be true for creating a directory under most operating systems). If it fails because the directory already existed, wait for a while and try again. After obtaining the '''#cvs.lock''' lock, create a file whose name is '''#cvs.rfl.''' followed by information of your choice (for example, hostname and process identification number). Then remove the '''#cvs.lock''' directory to release the master lock. Then proceed with reading the repository. When you are done, remove the '''#cvs.rfl''' file to release the read lock.

Promotable read locks are a concept you may not find in other literature on concurrency. They are used to allow a two (or more) pass process to only lock a file for read on the first (read) pass(es), then upgrade its read locks to write locks if necessary for a final pass, still assured that the files have not changed since they were first read.

CVS uses promotable read locks, for example, to prevent commit and tag verification passes from interfering with other reading processes. It can then lock only a single directory at a time for write during the write pass.

To obtain a promotable read lock, first create the

'''#cvs.lock''' directory, as with a nonpromotable read lock. Then check that there are no files that start with '''#cvs.pfl''' . If there are, remove the master '''#cvs.lock''' directory, wait a while (CVS waits 30 seconds between lock attempts) and try again. If there are no other promotable locks, go ahead and create a file whose name is '''#cvs.pfl''' followed by information of your choice. (For example, CVS uses its hostname and the process identification number of the CVS server process creating the lock.) If versions of CVS older than version 1.12.4 access your repository directly (not via a CVS server of version 1.12.4 or later), then you should also create a read lock since older versions of CVS will ignore the promotable lock when attempting to create their own write lock. Then remove the master '''#cvs.lock''' directory in order to allow other processes to obtain read locks.

To obtain a write lock, first create the

'''#cvs.lock''' directory, as with read locks. Then check that there are no files whose names start with '''#cvs.rfl.''' and no files whose names start with '''#cvs.pfl''' that are not owned by the process attempting to get the write lock. If either exist, remove '''#cvs.lock''' , wait for a while and try again. If there are no readers or promotable locks from other processes, then create a file whose name is '''#cvs.wfl''' followed by information of your choice. (Again, CVS uses the hostname and server process identification number.) Remove your '''#cvs.pfl''' file, if present. Hang on to the '''#cvs.lock''' lock. Proceed with writing the repository. When you are done, first remove the '''#cvs.wfl''' file and then the '''#cvs.lock''' directory. Note that unlike the '''#cvs.rfl''' file, the '''#cvs.wfl''' file is just informational; it has no effect on the locking operation beyond what is provided by holding on to the '''#cvs.lock''' lock itself.

Note that each lock (write lock or read lock) only locks a single directory in the repository, including

'''Attic''' and '''CVS''' but not including subdirectories that represent other directories under version control. To lock an entire tree, you need to lock each directory. (Note that if you fail to obtain any lock you need, you must release the whole tree before waiting and trying again, to avoid deadlocks.)

Note also that

CVS expects write locks to control access to individual '''foo,v''' files. RCS has a scheme where the ''',foo,''' file serves as a lock, but CVS does not implement it, and so taking out a CVS write lock is recommended. See the comments at rcs_internal_lockfile in the CVS source code for further discussion/rationale.

How files are stored in the CVSROOT directory

The

'''$CVSROOT/CVSROOT''' directory contains the various administrative files. In some ways this directory is just like any other directory in the repository; it contains RCS files whose names end in ''',v''', and many of the CVS commands operate on it the same way. However, there are a few differences.

For each administrative file, in addition to the

RCS file, there is also a checked-out copy of the file. For example, there is an RCS file '''loginfo,v''' and a file '''loginfo''' which contains the latest revision contained in '''loginfo,v''' . When you check in an administrative file, CVS should print

cvs commit: Rebuilding administrative file database

and update the checked out copy in

'''$CVSROOT/CVSROOT''' . If it does not, there is something wrong (see section [[CVS--Concurrent Versions System v1.12.12.1: Dealing with bugs in CVS or this manual#SEC214|Dealing with bugs in CVS or this manual]]). To add your own files to the files to be updated in this fashion, you can add them to the '''checkoutlist''' administrative file (see section [[CVS--Concurrent Versions System v1.12.12.1: Reference manual for Administrative files#SEC203|The checkoutlist file]]).

By default, the

'''modules''' file behaves as described above. If the modules file is very large, storing it as a flat text file may make looking up modules slow. (I'm not sure whether this is as much of a concern now as when CVS first evolved this feature; I haven't seen benchmarks.) Therefore, by making appropriate edits to the CVS source code one can store the modules file in a database which implements the '''ndbm''' interface, such as Berkeley db or GDBM. If this option is in use, then the modules database will be stored in the files '''modules.db''' , '''modules.pag''' , and/or '''modules.dir''' .

For information on the meaning of the various administrative files, see [[CVS--Concurrent Versions System v1.12.12.1: Reference manual for Administrative files#SEC175|Reference manual for Administrative files]].

How data is stored in the working directory

While we are discussing

CVS internals which may become visible from time to time, we might as well talk about what CVS puts in the `CVS' directories in the working directories. As with the repository, CVS handles this information and one can usually access it via CVS commands. But in some cases it may be useful to look at it, and other programs, such as the jCVS graphical user interface or the VC package for emacs, may need to look at it. Such programs should follow the recommendations in this section if they hope to be able to work with other programs which use those files, including future versions of the programs just mentioned and the command-line CVS client.

The

`CVS' directory contains several files. Programs which are reading this directory should silently ignore files which are in the directory but which are not documented here, to allow for future expansion.

The files are stored according to the text file convention for the system in question. This means that working directories are not portable between systems with differing conventions for storing text files. This is intentional, on the theory that the files being managed by

CVS probably will not be portable between such systems either.

`Root'

This file contains the current

CVS root, as described in [[#SEC10|Telling CVS where your repository is]].

`Repository'

This file contains the directory within the repository which the current directory corresponds with. It can be either an absolute pathname or a relative pathname;

CVS has had the ability to read either format since at least version 1.3 or so. The relative pathname is relative to the root, and is the more sensible approach, but the absolute pathname is quite common and implementations should accept either. For example, after the command

cvs -d :local:/usr/local/cvsroot checkout yoyodyne/tc

`Root'

will contain

:local:/usr/local/cvsroot

and

`Repository' will contain either

/usr/local/cvsroot/yoyodyne/tc

or

yoyodyne/tc

If the particular working directory does not correspond to a directory in the repository, then

`Repository' should contain `CVSROOT/Emptydir' .

</p>

`Entries'

This file lists the files and directories in the working directory. The first character of each line indicates what sort of line it is. If the character is unrecognized, programs reading the file should silently skip that line, to allow for future expansion.

If the first character is `/', then the format is:

/<var>name</var>/<var>revision</var>/<var>timestamp</var>[+<var>conflict</var>]/<var>options</var>/<var>tagdate</var>

where `[' and `]' are not part of the entry, but instead indicate that the `+' and conflict marker are optional.

name is the name of the file within the directory. revision is the revision that the file in the working derives from, or `0' for an added file, or `-' followed by a revision for a removed file. timestamp is the timestamp of the file at the time that CVS created it; if the timestamp differs with the actual modification time of the file it means the file has been modified. It is stored in the format used by the ISO C asctime() function (for example, `Sun Apr 7 01:29:26 1996'). One may write a string which is not in that format, for example, `Result of merge', to indicate that the file should always be considered to be modified. This is not a special case; to see whether a file is modified a program should take the timestamp of the file and simply do a string compare with timestamp . If there was a conflict, conflict can be set to the modification time of the file after the file has been written with conflict markers (see section [[CVS--Concurrent Versions System v1.12.12.1: Multiple developers#SEC87|Conflicts example]]). Thus if conflict is subsequently the same as the actual modification time of the file it means that the user has obviously not resolved the conflict. options contains sticky options (for example `-kb' for a binary file). tagdate contains `T' followed by a tag name, or `D' for a date, followed by a sticky tag or date. Note that if timestamp contains a pair of timestamps separated by a space, rather than a single timestamp, you are dealing with a version of CVS earlier than CVS 1.5 (not documented here).

The timezone on the timestamp in CVS/Entries (local or universal) should be the same as the operating system stores for the timestamp of the file itself. For example, on Unix the file's timestamp is in universal time (UT), so the timestamp in CVS/Entries should be too. On

VMS , the file's timestamp is in local time, so CVS on VMS should use local time. This rule is so that files do not appear to be modified merely because the timezone changed (for example, to or from summer time).

If the first character of a line in

`Entries' is `D', then it indicates a subdirectory. `D' on a line all by itself indicates that the program which wrote the `Entries' file does record subdirectories (therefore, if there is such a line and no other lines beginning with `D', one knows there are no subdirectories). Otherwise, the line looks like:

D/<var>name</var>/<var>filler1</var>/<var>filler2</var>/<var>filler3</var>/<var>filler4</var>

where

name is the name of the subdirectory, and all the filler fields should be silently ignored, for future expansion. Programs which modify Entries files should preserve these fields.

The lines in the

`Entries' file can be in any order.

`Entries.Log'

This file does not record any information beyond that in

`Entries' , but it does provide a way to update the information without having to rewrite the entire `Entries' file, including the ability to preserve the information even if the program writing `Entries' and `Entries.Log' abruptly aborts. Programs which are reading the `Entries' file should also check for `Entries.Log' . If the latter exists, they should read `Entries' and then apply the changes mentioned in `Entries.Log' . After applying the changes, the recommended practice is to rewrite `Entries' and then delete `Entries.Log' . The format of a line in `Entries.Log' is a single character command followed by a space followed by a line in the format specified for a line in `Entries' . The single character command is `A' to indicate that the entry is being added, `R' to indicate that the entry is being removed, or any other character to indicate that the entire line in `Entries.Log' should be silently ignored (for future expansion). If the second character of the line in `Entries.Log' is not a space, then it was written by an older version of CVS (not documented here).

Programs which are writing rather than reading can safely ignore

`Entries.Log' if they so choose.

`Entries.Backup'

This is a temporary file. Recommended usage is to write a new entries file to

`Entries.Backup' , and then to rename it (atomically, where possible) to `Entries' .

`Entries.Static'

The only relevant thing about this file is whether it exists or not. If it exists, then it means that only part of a directory was gotten and

CVS will not create additional files in that directory. To clear it, use the update command with the `-d' option, which will get the additional files and remove `Entries.Static' .

`Tag'

This file contains per-directory sticky tags or dates. The first character is `T' for a branch tag, `N' for a non-branch tag, or `D' for a date, or another character to mean the file should be silently ignored, for future expansion. This character is followed by the tag or date. Note that per-directory sticky tags or dates are used for things like applying to files which are newly added; they might not be the same as the sticky tags or dates on individual files. For general information on sticky tags and dates, see [[CVS--Concurrent Versions System v1.12.12.1: Revisions#SEC55|Sticky tags]].

`Notify'

This file stores notifications (for example, for

edit or unedit ) which have not yet been sent to the server. Its format is not yet documented here.

`Notify.tmp'

This file is to

`Notify' as `Entries.Backup' is to `Entries' . That is, to write `Notify' , first write the new contents to `Notify.tmp' and then (atomically where possible), rename it to `Notify' .

`Base'

If watches are in use, then an

edit command stores the original copy of the file in the `Base' directory. This allows the unedit command to operate even if it is unable to communicate with the server.

`Baserev'

The file lists the revision for each of the files in the

`Base' directory. The format is:

B<var>name</var>/<var>rev</var>/<var>expansion</var>

where

expansion should be ignored, to allow for future expansion.

`Baserev.tmp'

This file is to

`Baserev' as `Entries.Backup' is to `Entries' . That is, to write `Baserev' , first write the new contents to `Baserev.tmp' and then (atomically where possible), rename it to `Baserev' .

`Template'

This file contains the template specified by the

`rcsinfo' file (see section [[CVS--Concurrent Versions System v1.12.12.1: Reference manual for Administrative files#SEC201|Rcsinfo]]). It is only used by the client; the non-client/server CVS consults `rcsinfo' directly.

The administrative files

The directory

`$CVSROOT/CVSROOT' contains some administrative files . See section [[CVS--Concurrent Versions System v1.12.12.1: Reference manual for Administrative files#SEC175|Reference manual for Administrative files]], for a complete description. You can use CVS without any of these files, but some commands work better when at least the `modules' file is properly set up.

The most important of these files is the

`modules' file. It defines all modules in the repository. This is a sample `modules' file.

CVSROOT         CVSROOT
modules         CVSROOT modules
cvs             gnu/cvs
rcs             gnu/rcs
diff            gnu/diff
tc              yoyodyne/tc

The

`modules' file is line oriented. In its simplest form each line contains the name of the module, whitespace, and the directory where the module resides. The directory is a path relative to $CVSROOT . The last four lines in the example above are examples of such lines.

The line that defines the module called `modules' uses features that are not explained here. See section [[CVS--Concurrent Versions System v1.12.12.1: Reference manual for Administrative files#SEC176|The modules file]], for a full explanation of all the available features.

Editing administrative files

You edit the administrative files in the same way that you would edit any other module. Use `cvs checkout CVSROOT' to get a working copy, edit it, and commit your changes in the normal way.

It is possible to commit an erroneous administrative file. You can often fix the error and check in a new revision, but sometimes a particularly bad error in the administrative file makes it impossible to commit new revisions. If and when this happens, you can correct the problem by temporarily copying a corrected administrative file directly into the

$CVSROOT/CVSROOT repository directory, then committing the same correction via a checkout of the CVSROOT module. It is important that the correction also be made via a checkout, or the next checkout and commit to the CVSROOT module will overwrite the correction that was copied directly into the repository, possibly breaking things in such a way as to prevent commits again.

Multiple repositories

In some situations it is a good idea to have more than one repository, for instance if you have two development groups that work on separate projects without sharing any code. All you have to do to have several repositories is to specify the appropriate repository, using the

CVSROOT environment variable, the `-d' option to CVS , or (once you have checked out a working directory) by simply allowing CVS to use the repository that was used to check out the working directory (see section [[#SEC10|Telling CVS where your repository is]]).

The big advantage of having multiple repositories is that they can reside on different servers. With

CVS version 1.10, a single command cannot recurse into directories from different repositories. With development versions of CVS , you can check out code from multiple servers into your working directory. CVS will recurse and handle all the details of making connections to as many server machines as necessary to perform the requested command. Here is an example of how to set up a working directory:

cvs -d server1:/cvs co dir1
cd dir1
cvs -d server2:/root co sdir
cvs update

The

cvs co commands set up the working directory, and then the cvs update command will contact server2, to update the dir1/sdir subdirectory, and server1, to update everything else.

Creating a repository

This section describes how to set up a

CVS repository for any sort of access method. After completing the setup described in this section, you should be able to access your CVS repository immediately via the local access method and several remote access methods. For more information on setting up remote access to the repository you create in this section, please read the section on [[#SEC26|Remote repositories]].

To set up a

CVS repository, first choose the machine and disk on which you want to store the revision history of the source files. CPU and memory requirements are modest, so most machines should be adequate. For details see [[#SEC27|Server requirements]].

To estimate disk space requirements, if you are importing RCS files from another system, the size of those files is the approximate initial size of your repository, or if you are starting without any version history, a rule of thumb is to allow for the server approximately three times the size of the code to be under

CVS for the repository (you will eventually outgrow this, but not for a while). On the machines on which the developers will be working, you'll want disk space for approximately one working directory for each developer (either the entire tree or a portion of it, depending on what each developer uses).

The repository should be accessible (directly or via a networked file system) from all machines which want to use

CVS in server or local mode; the client machines need not have any access to it other than via the CVS protocol. It is not possible to use CVS to read from a repository which one only has read access to; CVS needs to be able to create lock files (see section [[CVS--Concurrent Versions System v1.12.12.1: Multiple developers#SEC89|Several developers simultaneously attempting to run CVS]]).

To create a repository, run the

cvs init command. It will set up an empty repository in the CVS root specified in the usual way (see section [[#SEC9|The Repository]]). For example,

cvs -d /usr/local/cvsroot init

cvs init

is careful to never overwrite any existing files in the repository, so no harm is done if you run cvs init on an already set-up repository.

cvs init

will enable history logging; if you don't want that, remove the history file after running cvs init . See section [[CVS--Concurrent Versions System v1.12.12.1: Reference manual for Administrative files#SEC204|The history file]].

Backing up a repository

There is nothing particularly magical about the files in the repository; for the most part it is possible to back them up just like any other files. However, there are a few issues to consider.

The first is that to be paranoid, one should either not use

CVS during the backup, or have the backup program lock CVS while doing the backup. To not use CVS , you might forbid logins to machines which can access the repository, turn off your CVS server, or similar mechanisms. The details would depend on your operating system and how you have CVS set up. To lock CVS , you would create `#cvs.rfl' locks in each repository directory. See [[CVS--Concurrent Versions System v1.12.12.1: Multiple developers#SEC89|Several developers simultaneously attempting to run CVS]], for more on CVS locks. Having said all this, if you just back up without any of these precautions, the results are unlikely to be particularly dire. Restoring from backup, the repository might be in an inconsistent state, but this would not be particularly hard to fix manually.

When you restore a repository from backup, assuming that changes in the repository were made after the time of the backup, working directories which were not affected by the failure may refer to revisions which no longer exist in the repository. Trying to run

CVS in such directories will typically produce an error message. One way to get those changes back into the repository is as follows:

• Get a new working directory.

• Copy the files from the working directory from before the failure over to the new working directory (do not copy the contents of the `CVS' directories, of course).

• Working in the new working directory, use commands such as cvs update and cvs diff to figure out what has changed, and then when you are ready, commit the changes into the repository.

Moving a repository

Just as backing up the files in the repository is pretty much like backing up any other files, if you need to move a repository from one place to another it is also pretty much like just moving any other collection of files.

The main thing to consider is that working directories point to the repository. The simplest way to deal with a moved repository is to just get a fresh working directory after the move. Of course, you'll want to make sure that the old working directory had been checked in before the move, or you figured out some other way to make sure that you don't lose any changes. If you really do want to reuse the existing working directory, it should be possible with manual surgery on the

`CVS/Repository' files. You can see [[#SEC19|How data is stored in the working directory]], for information on the `CVS/Repository' and `CVS/Root' files, but unless you are sure you want to bother, it probably isn't worth it.

Remote repositories

Your working copy of the sources can be on a different machine than the repository. Using

CVS in this manner is known as client/server operation. You run CVS on a machine which can mount your working directory, known as the client , and tell it to communicate to a machine which can mount the repository, known as the server . Generally, using a remote repository is just like using a local one, except that the format of the repository name is:

[:<var>method</var>:][[<var>user</var>][:<var>password</var>]@]<var>hostname</var>[:[<var>port</var>]]/path/to/repository

Specifying a password in the repository name is not recommended during checkout, since this will cause

CVS to store a cleartext copy of the password in each created directory. cvs login first instead (see section [[#SEC32|Using the client with password authentication]]).

The details of exactly what needs to be set up depend on how you are connecting to the server.

Server requirements

The quick answer to what sort of machine is suitable as a server is that requirements are modest--a server with 32M of memory or even less can handle a fairly large source tree with a fair amount of activity.

The real answer, of course, is more complicated. Estimating the known areas of large memory consumption should be sufficient to estimate memory requirements. There are two such areas documented here; other memory consumption should be small by comparison (if you find that is not the case, let us know, as described in [[CVS--Concurrent Versions System v1.12.12.1: Dealing with bugs in CVS or this manual#SEC214|Dealing with bugs in CVS or this manual]], so we can update this documentation).

The first area of big memory consumption is large checkouts, when using the

CVS server. The server consists of two processes for each client that it is serving. Memory consumption on the child process should remain fairly small. Memory consumption on the parent process, particularly if the network connection to the client is slow, can be expected to grow to slightly more than the size of the sources in a single directory, or two megabytes, whichever is larger.

Multiplying the size of each

CVS server by the number of servers which you expect to have active at one time should give an idea of memory requirements for the server. For the most part, the memory consumed by the parent process probably can be swap space rather than physical memory.

The second area of large memory consumption is

diff , when checking in large files. This is required even for binary files. The rule of thumb is to allow about ten times the size of the largest file you will want to check in, although five times may be adequate. For example, if you want to check in a file which is 10 megabytes, you should have 100 megabytes of memory on the machine doing the checkin (the server machine for client/server, or the machine running CVS for non-client/server). This can be swap space rather than physical memory. Because the memory is only required briefly, there is no particular need to allow memory for more than one such checkin at a time.

Resource consumption for the client is even more modest--any machine with enough capacity to run the operating system in question should have little trouble.

For information on disk space requirements, see [[#SEC23|Creating a repository]].

The connection method

In its simplest form, the

method portion of the repository string (see section [[#SEC26|Remote repositories]]) may be one of `ext', `fork', `gserver', `kserver', `local', `pserver', and, on some platforms, `server'.

If

method is not specified, and the repository name starts with a `/', then the default is local . If method is not specified, and the repository name does not start with a `/', then the default is ext or server , depending on your platform; both the `ext' and `server' methods are described in [[#SEC29|Connecting with rsh]].

The

ext , fork , gserver , and pserver connection methods all accept optional method options, specified as part of the method string, like so:

:<var>method</var>[;<var>option</var>=<var>arg</var>...]:<var>other_connection_data</var>

CVS

is not sensitive to the case of method or option , though it may sometimes be sensitive to the case of arg . The possible method options are as follows:

proxy=hostname

proxyport=port

These two method options can be used to connect via an HTTP tunnel style web proxy.

hostname should be the name of the HTTP proxy server to connect through and port is the port number on the HTTP proxy server to connect via. port defaults to 8080.

NOTE: An HTTP proxy server is not the same as a

CVS write proxy server - please see [[#SEC37|Distributing load across several CVS servers]] for more on CVS write proxies.

For example, to connect pserver via a web proxy listening on port 8000 of www.myproxy.net, you would use a method of:

:pserver;proxy=www.myproxy.net;proxyport=8000:<var>pserver_connection_string</var>

NOTE: In the above example,

pserver_connection_string is still required to connect and authenticate to the CVS server, as noted in the upcoming sections on password authentication, gserver , and kserver . The example above only demonstrates a modification to the method portion of the repository name.

These options first appeared in

CVS version 1.12.7 and are valid as modifcations to the gserver and pserver connection methods.

CVS_RSH=path

This method option can be used with the

ext method to specify the path the CVS client will use to find the remote shell used to contact the CVS server and takes precedence over any path specified in the $CVS_RSH environment variable (see section [[#SEC29|Connecting with rsh]]). For example, to connect to a CVS server via the local `/path/to/ssh/command' command, you could choose to specify the following path via the CVS_RSH method option:

:ext;CVS_RSH=/path/to/ssh/command:<var>ext_connection_string</var>

This method option first appeared in

CVS version 1.12.11 and is valid only as a modifcation to the ext connection method.

CVS_SERVER=path

This method option can be used with the

ext and fork methods to specify the path CVS will use to find the CVS executable on the CVS server and takes precedence over any path specified in the $CVS_SERVER environment variable (see section [[#SEC29|Connecting with rsh]]). For example, to select the remote `/path/to/cvs/command' executable as your CVS server application on the CVS server machine, you could choose to specify the following path via the CVS_SERVER method option:

:ext;CVS_SERVER=/path/to/cvs/command:<var>ext_connection_string</var>

or, to select an executable named `cvs-1.12.11', assuming it is in your

$PATH on the CVS server:

:ext;CVS_SERVER=cvs-1.12.11:<var>ext_connection_string</var>

This method option first appeared in

CVS version 1.12.11 and is valid as a modifcation to both the ext and fork connection methods.

Redirect=boolean-state

The

Redirect method option determines whether the CVS client will allow a CVS server to redirect it to a different CVS server, usually for write requests, as in a write proxy setup.

A

boolean-state of any value acceptable for boolean `CVSROOT/config' file options is acceptable here (see section [[CVS--Concurrent Versions System v1.12.12.1: Reference manual for Administrative files#SEC206|The CVSROOT/config configuration file]]). For example, `on', `off', `true', and `false' are all valid values for boolean-state . boolean-state for the Redirect method option defaults to `on'.

This option will have no effect when talking to any non-secondary

CVS server. For more on write proxies and secondary servers, please see [[#SEC37|Distributing load across several CVS servers]].

This method option first appeared in

CVS version 1.12.11 and is valid only as a modifcation to the ext connection method.

As a further example, to combine both the

CVS_RSH and CVS_SERVER options, a method specification like the following would work:

:ext;CVS_RSH=/path/to/ssh/command;CVS_SERVER=/path/to/cvs/command:

This means that you would not need to have the

CVS_SERVER or CVS_RSH environment variables set correctly. See [[#SEC29|Connecting with rsh]], for more details on these environment variables.

Connecting with rsh

CVS

uses the `rsh' protocol to perform these operations, so the remote user host needs to have a `.rhosts' file which grants access to the local user. Note that the program that CVS uses for this purpose may be specified using the `--with-rsh' flag to configure.

For example, suppose you are the user `mozart' on the local machine `toe.example.com', and the server machine is `faun.example.org'. On faun, put the following line into the file

`.rhosts' in `bach''s home directory:

toe.example.com  mozart

Then test that `rsh' is working with

rsh -l bach faun.example.org 'echo $PATH'

Next you have to make sure that

rsh will be able to find the server. Make sure that the path which rsh printed in the above example includes the directory containing a program named cvs which is the server. You need to set the path in `.bashrc' , `.cshrc' , etc., not `.login' or `.profile' . Alternately, you can set the environment variable CVS_SERVER on the client machine to the filename of the server you want to use, for example `/usr/local/bin/cvs-1.6' . For the ext and fork methods, you may also specify CVS_SERVER as an option in the CVSROOT so that you may use different servers for different roots. See [[#SEC26|Remote repositories]] for more details.

There is no need to edit

`inetd.conf' or start a CVS server daemon.

There are two access methods that you use in

CVSROOT for rsh. :server: specifies an internal rsh client, which is supported only by some CVS ports. :ext: specifies an external rsh program. By default this is rsh (unless otherwise specified by the `--with-rsh' flag to configure) but you may set the CVS_RSH environment variable to invoke another program which can access the remote server (for example, remsh on HP-UX 9 because rsh is something different). It must be a program which can transmit data to and from the server without modifying it; for example the Windows NT rsh is not suitable since it by default translates between CRLF and LF. The OS/2 CVS port has a hack to pass `-b' to rsh to get around this, but since this could potentially cause problems for programs other than the standard rsh , it may change in the future. If you set CVS_RSH to SSH or some other rsh replacement, the instructions in the rest of this section concerning `.rhosts' and so on are likely to be inapplicable; consult the documentation for your rsh replacement.

You may choose to specify the

CVS_RSH option as a method option in the CVSROOT string to allow you to use different connection tools for different roots (see section [[#SEC28|The connection method]]). For example, allowing some roots to use CVS_RSH=remsh and some to use CVS_RSH=ssh for the ext method. See also the [[#SEC26|Remote repositories]] for more details.

Continuing our example, supposing you want to access the module

`foo' in the repository `/usr/local/cvsroot/' , on machine `faun.example.org' , you are ready to go:

cvs -d :ext:bach@faun.example.org:/usr/local/cvsroot checkout foo

(The

`bach@' can be omitted if the username is the same on both the local and remote hosts.)

Direct connection with password authentication

The

CVS client can also connect to the server using a password protocol. This is particularly useful if using rsh is not feasible (for example, the server is behind a firewall), and Kerberos also is not available.

To use this method, it is necessary to make some adjustments on both the server and client sides.

Setting up the server for password authentication

First of all, you probably want to tighten the permissions on the

`$CVSROOT' and `$CVSROOT/CVSROOT' directories. See [[#SEC33|Security considerations with password authentication]], for more details.

Depending on your system or version there are different alternatives for serving CVS. inetd is an older implementation of xinetd, and on Mac OS X launchd replace both inetd and xinetd.

inetd

On the server side, the file

`/etc/inetd.conf' needs to be edited so inetd knows to run the command cvs pserver when it receives a connection on the right port. By default, the port number is 2401; it would be different if your client were compiled with CVS_AUTH_PORT defined to something else, though. This can also be specified in the CVSROOT variable (see section [[#SEC26|Remote repositories]]) or overridden with the CVS_CLIENT_PORT environment variable (see section [[CVS--Concurrent Versions System v1.12.12.1: All environment variables which affect CVS#SEC207|All environment variables which affect CVS]]).

If your

inetd allows raw port numbers in `/etc/inetd.conf' , then the following (all on a single line in `inetd.conf' ) should be sufficient:

2401  stream  tcp  nowait  root  /usr/local/bin/cvs
cvs -f --allow-root=/usr/cvsroot pserver

(You could also use the `-T' option to specify a temporary directory.)

The `--allow-root' option specifies the allowable

CVSROOT directory. Clients which attempt to use a different CVSROOT directory will not be allowed to connect. If there is more than one CVSROOT directory which you want to allow, repeat the option. (Unfortunately, many versions of inetd have very small limits on the number of arguments and/or the total length of the command. The usual solution to this problem is to have inetd run a shell script which then invokes CVS with the necessary arguments.)

If your

inetd wants a symbolic service name instead of a raw port number, then put this in `/etc/services' :

cvspserver      2401/tcp

and put

cvspserver instead of 2401 in `inetd.conf' .

NOTE: In Solaris 10, services are no longer managed by editing the inetd configuration file, inetd.conf. Instead, you use inetconv to convert the configuration file content into SMF format services, then manage these services using inetadm and svcadm. Once a service has been converted by inetconv, any changes to the legacy data in the inetd config file will not become effective. However, inetd does alert the administrator when it notices change in the configuration file.

Once the above is taken care of, restart your

inetd , or do whatever is necessary to force it to reread its initialization files. The standard way to restart a deamon is to send it a HUP signal:

sudo kill -HUP `cat /var/run/inetd.pid`

If you are having trouble setting this up, see [[CVS--Concurrent Versions System v1.12.12.1: Troubleshooting#SEC211|Trouble making a connection to a CVS server]].

xinetd

If your system uses

xinetd instead of inetd , the procedure is slightly different. Create a file called `/etc/xinetd.d/cvspserver' containing the following:

service cvspserver
{
   port        = 2401
   socket_type = stream
   protocol    = tcp
   wait        = no
   user        = root
   passenv     = PATH
   server      = /usr/local/bin/cvs
   server_args = -f --allow-root=/usr/cvsroot pserver
}

(If

cvspserver is defined in `/etc/services' , you can omit the port line.)

Once the service is specified, restart your

xinetd , or do whatever is necessary to force it to reread its initialization files. The standard way to restart a deamon is to send it a HUP signal:

sudo kill -HUP `cat /var/run/xinetd.pid`

If you are having trouble setting this up, see [[CVS--Concurrent Versions System v1.12.12.1: Troubleshooting#SEC211|Trouble making a connection to a CVS server]].

launchd

If your system support launchd, you create a launch service. Create a property list file called `/Library/LaunchDaemons/cvspserver.plist' containing the following:

NOTE: http://lingon.sourceforge.net/ is a graphical adminstrator tool for creating launchd configuration files and controlling them through launchctl for Mac OS X.

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
	<key>Disabled</key>
	<false/>
	<key>GroupName</key>
	<string>wheel</string>
	<key>InitGroups</key>
	<true/>
	<key>Label</key>
	<string>cvspserver</string>
	<key>ProgramArguments</key>
	<array>
		<string>/usr/bin/cvs</string>
		<string>-f</string>
		<string>--allow-root=/usr/local/bin/cvs </string>
		<string>pserver</string>
	</array>
	<key>Sockets</key>
	<dict>
		<key>Listeners</key>
		<dict>
			<key>SockServiceName</key>
			<string>cvspserver</string> <!-- Requires cvspserver/2401 record
							defined in /etc/services -->
		</dict>
	</dict>
	<key>UserName</key>
	<string>root</string>
	<key>inetdCompatibility</key>
	<dict>
		<key>Wait</key>
		<false/>
	</dict>
</dict>
</plist>

The pservice is a passive deamon, that's it, runned only when an incomming connection is etablished, and launchd utilize this. Therefore, once you have created the service you nead to load it, but not start it. If you changed the property list file you need to unload it first, then load it.

sudo launchctl unload /Library/LaunchDaemons/cvspserver.plist # only if running already
sudo launchctl load /Library/LaunchDaemons/cvspserver.plist

If you are having trouble setting this up, see Trouble making a connection to a CVS server.

Password and usernames

Because the client stores and transmits passwords in cleartext (almost--see [[#SEC33|Security considerations with password authentication]], for details), a separate

CVS password file is generally used, so people don't compromise their regular passwords when they access the repository. This file is `$CVSROOT/CVSROOT/passwd' (see section [[#SEC20|The administrative files]]). It uses a colon-separated format, similar to `/etc/passwd' on Unix systems, except that it has fewer fields: CVS username, optional password, and an optional system username for CVS to run as if authentication succeeds. Here is an example `passwd' file with five entries:

anonymous:
bach:ULtgRLXo7NRxs
spwang:1sOp854gDF3DY
melissa:tGX1fS8sun6rY:pubcvs
qproj:XR4EZcEs0szik:pubcvs

(The passwords are encrypted according to the standard Unix

crypt() function, so it is possible to paste in passwords directly from regular Unix `/etc/passwd' files.)

The first line in the example will grant access to any

CVS client attempting to authenticate as user anonymous , no matter what password they use, including an empty password. (This is typical for sites granting anonymous read-only access; for information on how to do the "read-only" part, see [[#SEC38|Read-only repository access]].)

The second and third lines will grant access to

bach and spwang if they supply their respective plaintext passwords.

The fourth line will grant access to

melissa , if she supplies the correct password, but her CVS operations will actually run on the server side under the system user pubcvs . Thus, there need not be any system user named melissa , but there must be one named pubcvs .

The fifth line shows that system user identities can be shared: any client who successfully authenticates as

qproj will actually run as pubcvs , just as melissa does. That way you could create a single, shared system user for each project in your repository, and give each developer their own line in the `$CVSROOT/CVSROOT/passwd' file. The CVS username on each line would be different, but the system username would be the same. The reason to have different CVS usernames is that CVS will log their actions under those names: when melissa commits a change to a project, the checkin is recorded in the project's history under the name melissa , not pubcvs . And the reason to have them share a system username is so that you can arrange permissions in the relevant area of the repository such that only that account has write-permission there.

If the system-user field is present, all password-authenticated

CVS commands run as that user; if no system user is specified, CVS simply takes the CVS username as the system username and runs commands as that user. In either case, if there is no such user on the system, then the CVS operation will fail (regardless of whether the client supplied a valid password).

The password and system-user fields can both be omitted (and if the system-user field is omitted, then also omit the colon that would have separated it from the encrypted password). For example, this would be a valid

`$CVSROOT/CVSROOT/passwd' file:

anonymous::pubcvs
fish:rKa5jzULzmhOo:kfogel
sussman:1sOp854gDF3DY

When the password field is omitted or empty, then the client's authentication attempt will succeed with any password, including the empty string. However, the colon after the

CVS username is always necessary, even if the password is empty.

CVS

can also fall back to use system authentication. When authenticating a password, the server first checks for the user in the `$CVSROOT/CVSROOT/passwd' file. If it finds the user, it will use that entry for authentication as described above. But if it does not find the user, or if the CVS `passwd' file does not exist, then the server can try to authenticate the username and password using the operating system's user-lookup routines (this "fallback" behavior can be disabled by setting SystemAuth=no in the CVS `config' file, see section [[CVS--Concurrent Versions System v1.12.12.1: Reference manual for Administrative files#SEC206|The CVSROOT/config configuration file]]).

The default fallback behavior is to look in

`/etc/passwd' for this system user unless your system has PAM (Pluggable Authentication Modules) and your CVS server executable was configured to use it at compile time (using ./configure --enable-pam - see the INSTALL file for more). In this case, PAM will be consulted instead. This means that CVS can be configured to use any password authentication source PAM can be configured to use (possibilities include a simple UNIX password, NIS, LDAP, and others) in its global configuration file (usually `/etc/pam.conf' or possibly `/etc/pam.d/cvs' ). See your PAM documentation for more details on PAM configuration.

Note that PAM is an experimental feature in

CVS and feedback is encouraged. Please send a mail to one of the CVS mailing lists ( info-cvs@gnu.org or bug-cvs@gnu.org ) if you use the CVS PAM support.

WARNING: Using PAM gives the system administrator much more flexibility about how

CVS users are authenticated but no more security than other methods. See below for more.

CVS needs an "auth", "account" and "session" module in the PAM configuration file. A typical PAM configuration would therefore have the following lines in

`/etc/pam.conf' to emulate the standard CVS system `/etc/passwd' authentication:

cvs	auth	    required	pam_unix.so
cvs	account	    required	pam_unix.so
cvs	session	    required	pam_unix.so

The the equivalent

`/etc/pam.d/cvs' would contain

auth	    required	pam_unix.so
account	    required	pam_unix.so
session	    required	pam_unix.so

Some systems require a full path to the module so that

`pam_unix.so' (Linux) would become something like `/usr/lib/security/$ISA/pam_unix.so.1' (Sun Solaris). See the `contrib/pam' subdirectory of the CVS source distribution for further example configurations.

The PAM service name given above as "cvs" is just the service name in the default configuration and can be set using

./configure --with-hardcoded-pam-service-name=<pam-service-name> before compiling. CVS can also be configured to use whatever name it is invoked as as its PAM service name using ./configure --without-hardcoded-pam-service-name , but this feature should not be used if you may not have control of the name CVS will be invoked as.

Be aware, also, that falling back to system authentication might be a security risk:

CVS operations would then be authenticated with that user's regular login password, and the password flies across the network in plaintext. See [[#SEC33|Security considerations with password authentication]] for more on this. This may be more of a problem with PAM authentication because it is likely that the source of the system password is some central authentication service like LDAP which is also used to authenticate other services.

On the other hand, PAM makes it very easy to change your password regularly. If they are given the option of a one-password system for all of their activities, users are often more willing to change their password on a regular basis.

In the non-PAM configuration where the password is stored in the

`CVSROOT/passwd' file, it is difficult to change passwords on a regular basis since only administrative users (or in some cases processes that act as an administrative user) are typically given access to modify this file. Either there needs to be some hand-crafted web page or set-uid program to update the file, or the update needs to be done by submitting a request to an administrator to perform the duty by hand. In the first case, having to remember to update a separate password on a periodic basis can be difficult. In the second case, the manual nature of the change will typically mean that the password will not be changed unless it is absolutely necessary.

Note that PAM administrators should probably avoid configuring one-time-passwords (OTP) for

CVS authentication/authorization. If OTPs are desired, the administrator may wish to encourage the use of one of the other Client/Server access methods. See the section on see section [[#SEC26|Remote repositories]] for a list of other methods.

Right now, the only way to put a password in the

CVS `passwd' file is to paste it there from somewhere else. Someday, there may be a cvs passwd command.

Unlike many of the files in

`$CVSROOT/CVSROOT' , it is normal to edit the `passwd' file in-place, rather than via CVS . This is because of the possible security risks of having the `passwd' file checked out to people's working copies. If you do want to include the `passwd' file in checkouts of `$CVSROOT/CVSROOT' , see [[CVS--Concurrent Versions System v1.12.12.1: Reference manual for Administrative files#SEC203|The checkoutlist file]].

Using the client with password authentication

To r